Deutsche Version  ACT
Storage type:
short-term storage
long-term storage
promoted by:
BMWi
BMBF

Sort by:

Datedownwards

Electrical Storage | BMWi
Decentralised battery storage 12.4.2017

Battery System for owners and the grid

In the project PV-host scientists want to improve decentralized storage battery technically and economically. To this end, they compare solar storage that are suitable for detached houses. They want to find out which operating strategy operates useful with a memory as possible network. The storage will not only meet their own needs of the household, but also reduce feed-in peak. This is to ensure that the network can accommodate a total of more electricity from solar installations. ... more


Thermal Storage | BMWi
Sorption heat storage 12.4.2017

Sorptive heat storage using activated carbon

Activated carbon can be produced from a large variety of carbonaceous source materials. Different methods have also been established for the process steps of carbonization and activation for use in commercial applications. In the project HyAcitv researchers optimize activated carbons and in a further step, molded articles are produced for use in open sorption systems. The application of these moldings is demonstrated in a laboratory storage system. .

.. more


Thermal Storage | BMWi
Latent heat storage 12.4.2017

Pourable PCM for high temperatures

Dresden researchers develop small pourable and pumpable heat storage capsules for the temperature range from 130 to 350 ° C. The hollow spheres are made from metal alloys. Depending on the application, the diameters vary from 2 to 6 mm. The capsules contain salt mixtures for latent heat storage. ... more


Thermal Storage | BMWi
Chemical heat storage 12.4.2017

More efficiency through bulk movement

Chemical heat storage with Calziumoxid is being tested by Scientists of the DLR in the project BERTI. As a special feature, the laboratory unit of Stuttgart researchers has a wandering reaction bed. As a result the heat capacity of the storage and its heat output can be designed independently of one another. ... more


Physical Storage | BMWi
PCM storage 12.4.2017

Cheaper slurries for cooling processes

In order to reduce the cost of PCM storages, scientists develop new slurries and materials for cold storages. The aim of the project KOLAN is to develop an emulsion with a very high heat capacity. At a temperature difference of 6 Kelvin it should store about four times more heat than water. ... more


Electrical Storage | BMWi
Power-heat systems 12.4.2017

Network storage with hybrid photovoltaic system

Researchers develop new strategies for the operation of hybrid photovoltaic systems in residential buildings and small businesses. For this purpose, the scientists optimize the operation management by simulations and laboratory measurements in the project INE-VES. The optimized operations management will increase the benefit of the system for the power grid, as well as for the owner. ... more


Overarching Themes | BMWi
Wind-hyrogen systems 12.4.2017

Temporarily store excess wind in hydrogen

How can surplus wind energy be stored efficiently in the form of hydrogen in a large scale? Scientists consider the value chain from a technical and economic point of view in the project WESpe. The Analysis includes electrolysis, underground storage facilities and the connection to gas grids. ... more


Physical Storage | BMWi
ENABEL: PEM electrolyser 12.4.2017

Power gap filler in the megawatt class

In the project "Stromlückenfüller" Researchers investigate a power-to-gas-to-power concept. The aim is to buffer excess solar and wind power in the form of hydrogen. For the conversion, the researchers are developing a PEM electrolyzer stack for a rated input power of one megawatt. The electrolyzer combines with a hydrogen storage and biogas technology giving an efficient storage system. ... more


Thermal Storage | BMWi
High temperature storage 12.4.2017

Sorption heat storage for the industry

In MoGeSoWa researchers developed an efficient, cost-effective modular heat storage. The aim was, to increase the energy efficiency of combined heat and power plants. ... more


Thermal Storage | BMWi
Latent heat storage 12.4.2017

Fridges with latent heat storage

Researchers are studying the economic and technical potential of refrigerators with phase change materials as a sliding load in the electrical network. The aim is to demonstrate the feasibility and advantages and to determine the costs. ... more


Supported by: The Federal Government on the basis of a decision by the German Bundestag

Dates

no news in this list.